Photovoltaic

The construction of photovoltaic plants permits to use solar Energy to convert it in electricity by photovoltaic effect. The main components of photovoltaic plants connected to the network are:
• Photovoltaic field: deputed to convert solar Energy by photovoltaic modules placed efficiently facing the sun.
• Inverter: deputed to stabilize gathered energy, convert it in alternating current and feed it into the grid.
• Protection and control panel boards, to settle under current regulations from the inverter and the alimented network.
• A component often underestimated, connecting cables, they have to be UV and high temperature resistant.

The nominal power of a photovoltaic plant is measured with the sum of the nominal power values of each photovoltaic modules of which its field is made of, and the unit of measurement mostly used is Kilowatt peak (symbol: kWp).
The area covered by a photovoltaic plant is mostly slightly larger than the area covered only by the photovoltaic modules, that requires, with today’s technologies, around/about 8 m² / kWp which are added potential areas covered by the shadow cones of the modules, when arranged not in a coplanar way.
To be noted that every cell typology has a typical “consumption” in terms of area, with amorphous silicon technologies is over 20 m² / kWp. On ground installations or flat roof, it is common practice to geometrically dispose the field in several rows, appropriately singular raised towards the sun, in order to maximize the received radiation from modules. These rows are laid for geometric needs of the installation site and can or cannot match with electric strings, or rather serieses, laid instead for electrical system requirements.
Moreover to maximize the received sun radiation we plan and implement many more “tracking” sun photovoltaic modules that adapt the receiving panel inclination to sun’s rays during the day and season.
A special mention goes to the so-called BIPV, acronym of Building IntegratedPhotoVoltaics. The architectural integration is achieved arranging the photovoltaic plant field inside the profile of the building that hosts it. The techniques are mainly 3:

• Local replacement of the roof cladding (e.g. flat or curved tiles) with a suitable coating that is overlapped from the photovoltaic field, so that results fixed in the roof cladding.
• The use of appropriate integration technologies, as thin films.
• The use of structural photovoltaic modules, that integrate the infixed function, with or without double glazing.