Thermal solar

The solar collector or solar panel is the basic device on which is based this the technology. The collectors are crossed by a heat carrying fluid channeled in a solar circuit that leads it to an accumulator. The accumulator has the function to store more thermal Energy possible in order to use it when it’s needed. There exists several types, the latest are vacuum tubes that have a high efficiency and are subject to breakups.
A solar thermal system is made up of at least the following units:
• One or more collectors that give off the solar heat to the fluid; there are several types, from a simple copper plate crossed by a serpentine and painted with black varnish, to a selective panel treated with titanium dioxide (TINOX) the vacuum-sealed absorber. In the first two cases the absorber is protected with a toughened glass, that can be prismatic.
• A fluid storage tank.

There are two type of plants:
• With natural circulation: in this type of fluid it’s the water that heating rises for convention in a storage tank (boiler), that has to be placed above the panel, from which is supplied to the domestic users; it’s an open circuit, as the water that is consumed is replaced from the external flow. This plant has an advantage in its simplicity but is characterized by a high heat loss, at the expense of efficiency.
• With forced circulation: It is a circuit composed of a panel, a serpentine inside the boiler and connecting pipes. A pump, called circulator, allows the transfer of the heat gathered by the fluid, in this case propylene glycol, similar to ethylene glycol (liquid used for car radiators), to the serpentine inside the boiler. The circuit is considerably complex, it provides an expansion tank, a temperature control and other components, and has an electric consumption due to the pump and the control unit, but it has a higher thermal efficiency, since that the boiler is inside and is less susceptible to heat loss during night or adverse weather conditions.